Water is vital to humanity’s survival. Hence, it must be accessible everywhere. Water storage devices such as tanks are a vital resource in all parts of Australia, but most especially in the parts where drinking water is not always available. These water tanks come in different sizes and styles that fit your needs.
Regardless of the size and style, they all serve one basic purpose which is to extend the water availability whenever it’s needed. When you need water, the water tank will always come in handy. Even if you have a sufficient water system, your water tanks can still help in catching rainwaters to serve as a reservoir and save you from large utility bills.
When deciding which water storage best fit for you and your household, you must have an overview of how to install the device. To help you gain a better understanding of the process, here’s a step-by-step guide on how to install the water storage tank on your property.
1. Decide where to install your water storage tank.
Before you go over the water tank installation process, you must plan out where to install it. You can either install it aboveground or underground. For a better idea, here are some of their advantages to help you choose which one.
Aboveground Water tanks are easier to install and a lot cheaper. They are also much easier to maintain and monitor from any scratches and breaches since you don’t have to dig down and check the leak source.
Meanwhile, the Underground Water tank make better space usage. They also hold consistent temperatures and are even more secure since they are buried out of sight. You can take a look at this company as they can assist you on which is the best spot for your tank that would fit your needs. They also provide good quality tanks at an affordable price.
2. Construct a base.
You need to have a flat level base for your tank to stand on, regardless of the kind of tank you’ll install. Concrete is commonly used as a foundation. Although, some would go for a thick layer of construction material since it is more affordable.
The point of constructing a base is to have an even surface to position the tank. Make sure it is also wider than the tank so it would fit. It’s best recommended that you also build a retaining wall so the foundation won’t erode over time.
If you chose to set up an underground tank, you must excavate a hole first before constructing the foundation. You can use soil, sand, and concrete for the underground foundation.
3. Build an overflow drainage.
If you want to harvest and collect rainwater to save more water, you need to install an overflow spout. Some water tanks already have an overflow assembly installed. While others require a technician to build one. Don’t worry since it is not really that complicated to make.
You only need to create a hole first before attaching a gasket with its filter. Make sure to drill screws in place also to secure the fixture. Having overflow drainage will support the excess water by redirecting it to a container where you collect rainwater.
4. Connect your storage tank to a water source.
For this step, you need to hire a pro plumber with the right expertise. Handling this network of pipes, fittings level, and pressurization may be a challenge for you. If your water source is a well, you need to have pressure to direct the well water. Meanwhile, if your water source is rainwater, you need a roof gutter system to direct the rain into the tank. This is most commonly called the dry delivery system.
Regardless of which water source you’re connecting, your water storage tank must have filters. Filters will help unnecessary hard objects or debris to mix with your water. If your water tank is for drinking water, you need to have a more advanced filtration system.
For underground water tanks, install risers to lift the gaskets and inlets to their access point. The well water or water collection source will be directed here.
5. Install a pressure system
As mentioned above, pressure systems are challenging to handle, so it’s best to hire a professional for this job. Extra hardware is needed for any pressurized plumbing system. Most often you will need a pressure tank, a pressure switch, a relief valve, a check valve, and a boiler drain. The tools mentioned are needed to regulate the water line pressure from the water source to the tank inlet.
Key Takeaway
With the basic idea that you now have about installing water storage tanks for your property, you’re now set to go and choose the right water tank that fits your demands. If you’re still doubtful, don’t hesitate to contact a water tank expert to help you with your decision making.
